1. |
|
ModelMaker Comes in One Box
To begin “2Boting” simply open the box which contains the ModelMaker, application software, operators manual, a selection of cutters and sample cutting
materials.
|
2. |
|
ModelMaker Sits on Your Table
Take the 50 pound ModelMaker out of the box and place on a work surface. Then just plug the power cord into a 110V wall outlet.
2Bot is fully enclosed in an extruded aluminum structure with a clear acrylic window so you can see the cutting action.
|
3. |
|
Simple Hardware Interface
Insert the 2Bot Studio CD into your computer and follow the instructions to install the 2Bot drivers and application software. Then just plug your computer into the industry standard USB 2.0 interface. A vacuum port is also included. Just connect your small shop vacuum.
|
4. |
|
Pivot to Open
Insert a piece of the sample material provided with 2Bot and close the top.
2Bot offers the industry’s first pivot top and material cassette which makes it easy to insert raw materials and remove finished goods. When the top is open the power to the motors is switched off providing a safety interlock.
|
